add scripts

scripts/config.lua

@@ -0,0 +1,6 @@
+return {
+	target = {
+		linux = "~/scripts",
+		default = "~/scripts",
+	},
+}

scripts/files/add-edid.sh

@@ -0,0 +1,27 @@
+#!/bin/bash
+set -e
+
+ENTRY_DIR="/efi/loader/entries"
+BACKUP_DIR="${ENTRY_DIR}/backup-$(date +%F-%H%M%S)"
+EDID_PARAM="drm.edid_firmware=DP-1:edid/g80.bin"
+
+echo "Backing up boot entries..."
+sudo mkdir -p "$BACKUP_DIR"
+sudo cp -v "${ENTRY_DIR}"/*.conf "$BACKUP_DIR"
+
+echo "Adding EDID parameter to boot entry files..."
+for file in "${ENTRY_DIR}"/*.conf; do
+    if grep -q "$EDID_PARAM" "$file"; then
+        echo "Already present in $(basename "$file"), skipping."
+        continue
+    fi
+
+    # Use | as delimiter to avoid issues with '/'
+    sudo sed -i "s|^options|& ${EDID_PARAM}|" "$file"
+    echo "Updated $(basename "$file")"
+done
+
+echo
+echo "All done!"
+echo "Backup saved to: $BACKUP_DIR"
+echo "Reboot to apply changes."

scripts/files/cgnat.sh

@@ -0,0 +1,49 @@
+#!/bin/bash
+# Comprehensive CGNAT and IPv6 connectivity checker for Linux
+
+# ----------- Public IPs -----------
+PUBLIC_IPV4=$(curl -4 -s https://ifconfig.me)
+PUBLIC_IPV6=$(curl -6 -s https://ifconfig.me)
+
+# ----------- Local Interface Info -----------
+WAN_IF=$(ip route show default | awk '/default/ {print $5}')
+LOCAL_IPV4=$(ip -4 addr show "$WAN_IF" | awk '/inet / {print $2}' | cut -d/ -f1)
+LOCAL_IPV6=$(ip -6 addr show "$WAN_IF" | awk '/inet6 / && !/fe80/ {print $2}' | cut -d/ -f1)
+
+echo "===== CGNAT / IPv6 Check ====="
+echo "Network interface: $WAN_IF"
+echo
+
+echo "Local IPv4:  $LOCAL_IPV4"
+echo "Public IPv4: $PUBLIC_IPV4"
+echo
+echo "Local IPv6:  $LOCAL_IPV6"
+echo "Public IPv6: $PUBLIC_IPV6"
+echo
+echo "--------------------------------"
+
+# ----------- IPv4 Analysis -----------
+if [[ -z "$PUBLIC_IPV4" ]]; then
+  echo "🌐 No public IPv4 address detected (possibly IPv6-only connection)."
+elif [[ "$LOCAL_IPV4" =~ ^10\. || "$LOCAL_IPV4" =~ ^192\.168\. || "$LOCAL_IPV4" =~ ^172\.(1[6-9]|2[0-9]|3[0-1])\. || "$LOCAL_IPV4" =~ ^100\.(6[4-9]|[7-9][0-9]|1[0-1][0-9]|12[0-7])\. ]]; then
+  if [ "$PUBLIC_IPV4" != "$LOCAL_IPV4" ]; then
+    echo "⚠️  Your local IPv4 ($LOCAL_IPV4) is private, and your public IPv4 differs."
+    echo "➡️  You are likely behind CGNAT or another NAT layer."
+  else
+    echo "✅ Local and public IPv4 match — you have a public IPv4 address."
+  fi
+else
+  echo "✅ Local IPv4 appears to be public ($LOCAL_IPV4). No CGNAT detected."
+fi
+
+echo "--------------------------------"
+
+# ----------- IPv6 Analysis -----------
+if [[ -n "$PUBLIC_IPV6" ]]; then
+  echo "✅ Public IPv6 is active — your device has global IPv6 connectivity."
+else
+  echo "❌ No global IPv6 address detected."
+fi
+
+echo "--------------------------------"
+echo "Done."

scripts/files/cleanup-snapper.sh

@@ -0,0 +1,43 @@
+#!/bin/bash
+set -e
+
+echo "=== Snapper Cleanup Script ==="
+
+# 1. Show existing configs
+echo "[*] Listing Snapper configs..."
+snapper list-configs || { echo "No snapper configs found."; exit 0; }
+
+# 2. For each config, list snapshots and ask to delete
+for config in $(snapper list-configs | awk 'NR>1 {print $1}'); do
+    echo ""
+    echo "[*] Config: $config"
+    snapper -c "$config" list || true
+    read -rp "Delete ALL snapshots for config '$config'? [y/N] " ans
+    if [[ "$ans" =~ ^[Yy]$ ]]; then
+        echo "  -> Deleting snapshots for $config"
+        snapper -c "$config" delete 1-999999 || true
+    fi
+    read -rp "Remove config '$config'? [y/N] " ans2
+    if [[ "$ans2" =~ ^[Yy]$ ]]; then
+        echo "  -> Removing config $config"
+        snapper delete-config "$config" || true
+    fi
+done
+
+# 3. Optionally uninstall Snapper
+read -rp "Do you also want to uninstall Snapper? [y/N] " ans3
+if [[ "$ans3" =~ ^[Yy]$ ]]; then
+    if command -v zypper >/dev/null 2>&1; then
+        sudo zypper remove -y snapper
+    elif command -v dnf >/dev/null 2>&1; then
+        sudo dnf remove -y snapper
+    elif command -v apt >/dev/null 2>&1; then
+        sudo apt remove -y snapper
+    else
+        echo "Could not detect package manager. Please uninstall Snapper manually."
+    fi
+else
+    echo "Snapper package left installed."
+fi
+
+echo "=== Snapper cleanup complete ==="

scripts/files/fix-locale.sh

@@ -0,0 +1,46 @@
+#!/bin/bash
+
+XKB_FILE="/usr/share/X11/xkb/symbols/us"
+BACKUP_FILE="${XKB_FILE}.backup.$(date +%s)"
+
+echo "Creating backup at $BACKUP_FILE..."
+sudo cp "$XKB_FILE" "$BACKUP_FILE"
+if [ $? -ne 0 ]; then
+    echo "Backup failed."
+    exit 1
+fi
+
+echo "Modifying intl section to map acute+c to cedilla..."
+
+# Create a temp file with the fix
+TEMP_FILE=$(mktemp)
+
+# Extract intl section, modify it, then rebuild the file
+sudo bash << 'SCRIPT'
+XKB_FILE="/usr/share/X11/xkb/symbols/us"
+TEMP_FILE=$(mktemp)
+
+# Replace acute+c mapping with cedilla in the intl section
+sed '/xkb_symbols "intl"/,/^}/ {
+    s/ccedil, Ccedil/ccedil, Ccedil/g
+    s/\[ acute,/[ dead_acute,/g
+}' "$XKB_FILE" > "$TEMP_FILE.new"
+
+# If sed found the pattern, use it; otherwise, manually add cedilla to acute deadkey
+if grep -q "dead_acute" "$TEMP_FILE.new"; then
+    mv "$TEMP_FILE.new" "$XKB_FILE"
+else
+    # Fallback: inject cedilla mapping after the intl section starts
+    sed '/xkb_symbols "intl"/a\    // Map apostrophe+c to cedilla\n    key <AC02> { [ c, C, ccedil, Ccedil ] };' "$BACKUP_FILE" > "$XKB_FILE"
+fi
+
+rm -f "$TEMP_FILE" "$TEMP_FILE.new"
+SCRIPT
+
+echo "Clearing XKB cache..."
+rm -rf ~/.cache/xkb 2>/dev/null
+
+echo "Reloading Niri..."
+niri msg action quit
+
+echo "Done. Log back in."

scripts/files/launch-daemon.sh

@@ -0,0 +1,20 @@
+#!/usr/bin/env bash
+
+GAME_ID="1697700"
+YOUR_HOME="/home/thomasgl"
+YOUR_STEAM_DIR="$YOUR_HOME/.local/share/Steam"
+
+compatdataDir="$YOUR_STEAM_DIR/steamapps/compatdata/${GAME_ID}"
+mkdir "$compatdataDir" 2> /dev/null
+winePrefixDir=${compatdataDir}/pfx
+
+echo "Trying to enter winePrefixDir.."
+cd "$winePrefixDir" || exit
+echo "Entered winePrefixDir!"
+
+export STEAM_COMPAT_DATA_PATH="$compatdataDir"
+export STEAM_COMPAT_CLIENT_INSTALL_PATH="$YOUR_HOME/.steam"
+export WINEPREFIX="${winePrefixDir}"
+
+echo "Starting..."
+"$YOUR_STEAM_DIR/compatibilitytools.d/GE-Proton10-16/proton" run "$YOUR_STEAM_DIR/steamapps/common/Who's Lila/DAEMON/DAEMON.exe"

scripts/files/launch-lila.sh

@@ -0,0 +1,20 @@
+#!/usr/bin/env bash
+
+GAME_ID="1697700"
+YOUR_HOME="/home/thomasgl"
+YOUR_STEAM_DIR="$YOUR_HOME/.local/share/Steam"
+
+compatdataDir="$YOUR_STEAM_DIR/steamapps/compatdata/${GAME_ID}"
+mkdir "$compatdataDir" 2> /dev/null
+winePrefixDir=${compatdataDir}/pfx
+
+echo "Trying to enter winePrefixDir.."
+cd "$winePrefixDir" || exit
+echo "Entered winePrefixDir!"
+
+export STEAM_COMPAT_DATA_PATH="$compatdataDir"
+export STEAM_COMPAT_CLIENT_INSTALL_PATH="$YOUR_HOME/.steam"
+export WINEPREFIX="${winePrefixDir}"
+
+echo "Starting..."
+"$YOUR_STEAM_DIR/compatibilitytools.d/GE-Proton10-16/proton" run "$YOUR_STEAM_DIR/steamapps/common/Who's Lila/WhosLila.exe"

scripts/files/random-wallpaper.sh

@@ -0,0 +1,23 @@
+#!/bin/bash
+
+# Predefined folder path
+FOLDER="$HOME/wallpapers"
+
+# Check if folder exists
+if [[ ! -d "$FOLDER" ]]; then
+    echo "Error: Folder '$FOLDER' does not exist." >&2
+    exit 1
+fi
+
+# Find all image files recursively
+images=($(find "$FOLDER" -type f \( -iname "*.jpg" -o -iname "*.jpeg" -o -iname "*.png" -o -iname "*.gif" -o -iname "*.bmp" -o -iname "*.webp" \) 2>/dev/null))
+
+# Check if any images were found
+if [[ ${#images[@]} -eq 0 ]]; then
+    echo "No image files found in '$FOLDER' or its subdirectories" >&2
+    exit 1
+fi
+
+# Select and output random image path
+random_index=$((RANDOM % ${#images[@]}))
+echo "${images[$random_index]}"

scripts/files/reset-dp.sh

@@ -0,0 +1,11 @@
+#!/bin/bash
+# Wait for Hyprland to fully initialize
+sleep 2
+
+OUTPUT="DP-1"
+MODE="3840x2160@239.914001" # exact mode from wlr-randr
+
+# Turn off and back on
+wlr-randr --output "$OUTPUT" --off
+sleep 1
+wlr-randr --output "$OUTPUT" --mode "$MODE"

scripts/files/rofi-media.sh

@@ -0,0 +1,16 @@
+#!/bin/bash
+
+# Get the list of sinks and format for Rofi (index and name)
+sinks=$(pactl list sinks short | awk '{print $2}')
+
+# Use Rofi to select a sink (case-insensitive search)
+selected_sink_name=$(echo "$sinks" | rofi -i -dmenu -p "Select audio output:")
+
+# If a sink was selected
+if [ -n "$selected_sink_name" ]; then
+    # Get the index of the selected sink
+    selected_sink_index=$(pactl list sinks short | grep -F "$selected_sink_name" | awk '{print $1}' | head -n 1)
+
+    # Set the default sink
+    pactl set-default-sink "$selected_sink_index"
+fi